Home > News > Content

For The Main Ingredients Of For TOSHIBA Toner

Jun 09, 2017

The main component of carbon powder is not carbon, and most of the resin and carbon black, charge agent, magnetic powder and other components.

For TOSHIBA Toner is melted into the paper fiber at high temperature, the resin is oxidized into a gas with a stimulating odor, which is what we call 'ozone'. This kind of gas has only one advantage, is to protect the earth, reduce the harm of solar radiation. On the human body itself is no good, will cause irritation to the human mucosa, easy to improve the incidence of asthma or nose allergies, and even dizziness, vomiting and so on.

And some substitute powder, mostly using carbon black as raw materials, containing polycyclic aromatic hydrocarbons and dimethyl nitramine and other substances, which were three or four carcinogenic substances. These substances are used in the laser printer and the printer to add the supplies, a laser printer with magnetic For TOSHIBA Toner (carbon), the use of magnetic For TOSHIBA Toner, Powder) Main components: F-Fe3O4 crystal powder (PLGMENT): 20-30% Polyacrylate-styrene copolymer: 50-60% Charge regulator CCA: 10-20% Flow agent SiO2 Surface Modifier Polyethylene / Polypropylene Paraffin

Second, the non-toxic For TOSHIBA Toner control

For TOSHIBA Toner of various raw materials if the standardization of manufacturing in the sealed state of use can be non-toxic. According to AMES-test, the current market, a variety of bottled loose powder due to production technology and other conditions are difficult to meet the non-toxic requirements.

Third, the market part of the For TOSHIBA Toner is toxic

Many bulk or bottled carbon on the market (origin, site unknown) due to its plant equipment, technology, raw materials, environmental and other factors, particles ranging from 5-12 microns, the size of a large deviation. Polyvinyl acrylate-styrene copolymer polymerization, that is, molecular weight and distribution is critical, too large can not fix (resulting in false blackness), too small is a small molecule of toxic styrene gas escape, the human body for a long time in the Close to the use of such For TOSHIBA Toner printer environment, will cause harm to the human body, the probability of cancer than normal will be 4% higher, and will pollute the OPC drum and MR magnet roller, resulting in poor print cartridge.

For TOSHIBA Toner is divided into magnetic For TOSHIBA Toner and non-magnetic toner, and each machine model used in the toner composition ratio is different. Many bottled toner or bulk toner are no distinction, only a mixture of magnetic toner, with the wrong toner or poor quality when the toner is not just harmful to the human body and the environment, and will damage the printer and affect the printer life.

Fourth, fill the potential harm to human health

Cartridges in the absence of strict environmental protection in the case of filling powder, which small particles (the naked eye can not see) will fly in the air, the human body after repeated exposure to inhalation, the probability of cancer than normal will be about 10% higher, And the surface modifier polyethylene / polypropylene paraffin is inhaled into the body, the small molecules will be absorbed into the blood circulation system, and ultimately the vegetation in the kidney, very easy to be discharged (because the For TOSHIBA Toner insoluble and water), thus Induced kidney stones and other symptoms of the risk of 3 times higher than normal people.

Fifth, the general harm to the environment of carbon powder

In the filling of carbon powder at the same time the amount of carbon per gram can be contaminated 0.8 cubic meters of land. Original manufacturers or Mitsubishi, Bachuan, Central China and other manufacturers can control the waste powder within 5%, while the market common bottled powder waste powder are about 10%. Environmental For TOSHIBA Toner cartridges in its standard manufacturing waste powder will be produced as a raw material for the production of low-end copier with toner, thereby eliminating the harm to the environment.

Six, the hazards of For TOSHIBA Toner in the actual work of the control measures recommended

In order to effectively eliminate or reduce the harm to the human body and the environment, but also save the cost of printing, experts do the following recommendations: 1) try to use regular companies or brands of environmentally friendly For TOSHIBA Toner cartridges; 2) when not sure whether the filling of For TOSHIBA Toner 3) try not to fill in the workplace with toner, if necessary, should be in the factory under the strict environmental protection to do the filling process, and fill the qualified, the specification, the use of the printer, Toner; 4) if not in the case of environmental protection, as far as possible in the wild filled with air, and the waste of waste powder and the material with carbon powder burning.